EHE LIGHT™ UV Adhesive and Removal Solution Pack

This is the pair of consumables that a salon working with UV extensions reorders most often: the adhesive for application and the solution for removal. Both are designed to work together with the EHE LIGHT™ 395 nm lamp.

The adhesive cures in 6 to 8 seconds per side and leaves a fine, light, flexible bond that lasts up to 2 months. The removal solution softens that bond in a few seconds, with professional heat at 120°C, so it can be removed gently, without pulling.

• 1 × EHE LIGHT™ Clear adhesive 20 g, with precision dropper
• 1 × EHE LIGHT™ removal solution 30 ml, with precision dropper

The adhesive in the pack is the Clear shade, which becomes translucent once cured. If you mostly work on dark hair, the Black shade is available separately.

1. Place a small drop of adhesive on the section of natural hair, 1 to 1.5 cm from the scalp.
2. Position the extension strand where you want it.
3. Spread the adhesive with the brush over the whole bond area, without letting it build up.
4. Cure with the EHE LIGHT™ UV device: 6 to 8 seconds on the top and 6 to 8 on the underside, within 1 cm.

1. Apply 3 to 5 drops to each bond point and leave for a few seconds to soak in.
2. Activate the bond point with professional heat at 120°C.
3. Check that the bond point has softened and slide the removal tool through gently.
4. If it is still hard, add a few more drops and apply heat again. Never force it.

Delivery rates are shown at checkout.

Returns are accepted within 14 days.

Questions before you buy? Message us on WhatsApp at +34 615 430 785 or email info@ehelight.es: our technical team usually replies within 24 hours.